Published at Wednesday, April 04th, 2018 - 08:47:13 AM. Side-Chair. By Ernest Barnier.
A newer design on the market is the three position lift chair. They are deeper and wider than the two position lift chairs. The additional position is called the napping position, which is a fully reclined position. The weight limit is the same as that of the two position lift chair.
How much fabric will you need for each chair? There are two measurement methods: 1. Drape your fabric lengthwise over the chair until the material is draping on the floor on all sides - allow an extra 5 centimetres so you have some material to play with. 2. Or you can measure your chair with a measuring tape. Measure the chair beginning at the back legs on the floor. Measure to the top of the chair then down the front, across the seat and down to the floor at the front legs. This is how long you will need your material. Then measure the width of the seat. Measure from the right side of the chair legs, across the base of the chair and down to the left side of the chair legs. Add 5 centimetres for a seam to the length and width measurements.
Any content, trademark’s, or other material that might be found on the Apptualizate.com website that is not Apptualizate.com’s property remains the copyright of its respective owner/s. In no way does Apptualizate.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.